Foaming agent is an indispensable part of the construction industry

 Synthetic blowing agent overview

The synthetic foaming agent used for concrete is a highly concentrated and efficient liquid used to produce lightweight foamed concrete. Foamed concrete is also called foamed lightweight concrete (CLC).

CLC concrete has great potential in the construction of cellular lightweight applications, and the use of the correct type of foaming agent will make a huge difference in product properties (such as the mechanical properties of concrete and its resistance, etc.). Synthetic foaming agents are chemical substances that reduce the surface tension of liquids and are widely used in the manufacture of blocks, bricks, CLC concrete, etc. worldwide. Compared with other foaming agents, when high density is required, it can be formed with less energy. It is strongly recommended for use in the construction industry, as the demand for lightweight concrete continues to increase over time.

The blowing agent is usually added to the foam generator, and then the foam is blown out under high pressure. It can be used for foam concrete blocks, lightweight concrete slabs, lightweight blocks, and other products.

It is an integral part of the construction industry. Choosing a foaming agent is easy, but choosing the right foaming agent can be a little overwhelming.

Eat as if you are hungry, but you still choose the type that makes you happy physically and mentally.

The ideal chemical blowing agent should meet the following requirements:

1) The temperature range of the decomposition gas should not be too large

2) The deflation speed should be fast, and the deflation price can be controlled

3) The released gas should be non-toxic, non-corrosive, and non-flammable

4) The chemical foaming agent should be easy to disperse evenly,

5) Low price, stable storage, and non-toxic.

6) The residue after decomposition should be non-toxic, colorless, and odorless, and will not affect the physical, chemical, and mechanical properties of the plastic, and be chemically inert, and should not affect the melting rate and solidification of the plastic.

7) During the decomposition process, there should not be a lot of heat release, which will not affect the melting and solidification of the plastic.

8) The residue after decomposition has good compatibility with the resin, and no blooming or dialysis occurs.

9) The decomposition temperature of the blowing agent should be the same as the melting temperature of the resin.

In short, choosing the right foaming agent only takes half the effort to get twice the effect, so be careful when choosing.

Most people know about concrete foaming agents, but you may not know what details you need to tell. You may not use it, but when you use it, you may encounter various problems in practice. Therefore, if you want to avoid these embarrassing things, please read this article carefully.

Application of synthetic blowing agent

1. Foaming agent is used to making lightweight (CLC) blocks and panels;

2. Blowing agent is used to fill the gap;

Foamed concrete is also very useful for filling voids. Because of its high mobility, it can even be poured into the most inaccessible places. It can be used for planned work, and can quickly provide stability and support in emergency situations;

3. Foaming A gentleman is used for roof insulation;

4. Foaming agent is used to marking CLC blocks, cast-in-place walls, bridge reinforcement wall structures, floor structures, lightweight prefabricated blocks, fire protection, sound insulation, etc.

Synthetic blowing agent price

The price of synthetic blowing agents will vary randomly with the production cost of synthetic blowing agents, transportation cost, international situation, exchange rate, and market supply and demand. Tanki New Materials Co., Ltd. aims to help all industries and chemical wholesalers find high-quality, low-cost nanomaterials and chemicals by providing a full set of customized services. If you are looking for a synthetic blowing agent, please feel free to send an email to get the latest synthetic blowing agent prices.

Synthetic blowing agent suppliers

As a global synthetic blowing agent supplier, Tanki New Materials Co. Ltd has extensive experience in the performance, application, and cost-effective manufacturing of advanced and engineered materials. The company has successfully developed a series of admixtures (including foam concrete additives, concrete foaming agents for lightweight concrete, CLC blocks, superplasticizers, foam concrete strength enhancers, etc.), oxides, nitrides, high purity Target materials, functional ceramics, and structural devices, and provide OEM services.